Basler CXP-12 - Introduction; About this Document; Important Documentation

4
INTRODUCTION
INTRODUCTION
About this Document
This document provides information about how to install a Basler
boost CXP-12 camera and a Basler CXP-12 Interface Card (referred to here
as "interface card").
It also provides step-by-step instructions that help you to connect the
camera and the interface card and acquire your first images.
Important Documentation
Before installing the hardware, Basler strongly advises reading the
precautions and safety instructions of the following documents:
 Basler boost Getting Started Guide (AW001552)
 Basler CXP-12 Interface Card 1C Getting Started Guide (AW001558)
Note: This document describes the installation of Basler products only,
i.e., Basler boost CXP-12 cameras, Basler CXP-12 interface cards, and
additional accessories needed for operation, such as cables or cooling
elements.
You can, however, use your own frame grabbers and accessories. In this
case, observe the documentation of the corresponding manufacturers
to ensure proper installation.