Need help?Do you have a question about the Basler raL12288-66km and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Resolution | 12288 pixels |
| Line Rate | 66 kHz |
| Interface | Camera Link |
| Lens Mount | F-mount |
| Bit Depth | 8/10/12 bit |
| Pixel Size | 5.5 µm x 5.5 µm |
Lists essential safety warnings and precautions for camera handling and operation.
Describes the pylon software suite for camera operation and management.
Explains the pylon Viewer GUI application for camera parameter adjustment.
Details the Software Development Kits available for integrating cameras into applications.
Introduces the BBPL for direct access to camera register structures.
Details pinouts for camera connectors.
Outlines specifications and recommendations for camera cabling.
Explains proper grounding and cabling for camera power supply.
Describes methods for supplying power to the camera.
Details power supply via the Camera Link interface (PoCL).
Explains auxiliary power connection via the 6-pin connector.
Explains input and output signal configurations.
Details configuration of camera input lines for triggering.
Details configuration of camera output signals.
Details how to read the current state of input/output lines.
Explains how to check the status of an individual I/O line.
Describes how to check the status of all I/O lines simultaneously.
Explains how to determine the logic type (positive/negative) of I/O lines.
Explains how to initiate line acquisition using trigger signals.
Describes line start triggering when the mode is set to Off.
Explains factors affecting the maximum line acquisition rate.
Explains how pixel clock speed affects data transfer rate.
Details camera gain and black level adjustment features.
Explains the gain adjustment feature for image brightness.
Details automatic adjustment features for image properties like gain and exposure.
Details the automatic gain adjustment feature.
Explains the automatic exposure time adjustment feature.
Explains offset and gain shading correction to correct pixel variations.
Explains camera error reporting mechanisms.
Describes saving and managing camera parameter settings.
Explains the process and implications of resetting the camera.
Provides a checklist of information needed for support requests.
To Next Page