9469200995 i
DGC-2020ES Preface
Preface
This instruction manual provides information about the configuration of the DGC-2020ES Digital Genset
Controller. To accomplish this, the following information is provided:
• Device information and security settings
• Configuration via BESTCOMSPlus
®
and the front panel
• Communication settings
• Timekeeping
• Inputs and outputs
• Breaker management, synchronizer, bias control, and multiple generator management
• Alarm configuration
• Protection settings
• BESTlogic™Plus programmable logic
• Troubleshooting
Conventions Used in this Manual
Important safety and procedural information is emphasized and presented in this manual through
Warning, Caution, and Note boxes. Each type is illustrated and defined as follows.
Warning!
Warning boxes call attention to conditions or actions that may cause
personal injury or death.
Caution boxes call attention to operating conditions that may lead to
equipment or property damage.
Note boxes emphasize important information pertaining to Digital
Genset Controller installation or operation.
DGC-2020ES Instruction Manual Catalog
Available instruction manuals for the DGC-2020ES are listed in Table 1.
Table 1. Instruction Manuals
Configuration (this manual)