Battery Powered Photoelectric Smoke Alarm BAT
User’s Handbook 35 Status: 07-2008
Pos. Description Function
1 Housing Protects the electronics
2 Function test
button
Press to carry out a function test
3 LED Indicates that the alarm is in operational
condition
4 Mounting slot To secure alarm to mounting plate
5 Battery Power supply
6 Mounting lug Holds the housing in place
7 Mounting plate To be fastened to a ceiling
8 Mounting holes To secure the mounting plate to the
ceiling
7 Installation and use
The essential functions of the smoke alarm are explained in this
section.
Read it carefully, so that you understand and are able to activate
all the functions.
IMPORTANT: Observe the following instructions,
particularly those relating to safety, in order to prevent operating
errors and to avoid possible defects.
If problems arise, refer to the list of faults (section 12) or contact
our service centre (see sections 13).
To Next Page
Loading...