Battery Powered Photoelectric Smoke Alarm BAT
User’s Handbook 48 Status: 07-2008
12 Signals/list of faults
Mode Function
Normal
operation
The LED lights up once a minute
Alarm/ test
alarm
The LED flashes rapidly. An alarm can only
be silenced by removing the battery from the
battery clip.
Battery
replacement
signal
- When the alarm sounds briefly once a
minute, the battery has come to the end of
its life (see section 8).
- The LED no longer lights up, indicating that
the smoke alarm is no longer functioning.
IMPORTANT:
Any other repairs must be carried out by a qualified technician.
Fault Possible
cause(s)
Remedy
Alarm not working Battery drained - Replace battery
Function button
does not trigger
function test
- Battery drained
- Product defective
- Replace battery
- Contact a
technician
To Next Page
Loading...