Battery Powered Photoelectric Smoke Alarm BAT
User’s Handbook 45 Status: 07-2008
7.4. Function check/test
Step Action Description
1 Carry out
function test
IMPORTANT: A function test must
be carried out weekly. Press and hold
the function test button for 3 seconds.
This is followed by a loud intermittent
acoustic alarm which will stop when the
button is released. During the function
test, the LED flashes rapidly.
Pos Description Function
2 Function
button
Carries out function
test when pressed
3 LED Indicates that the
alarm is in
operational
condition
2
3
To Next Page
Loading...