2. Product Introduction
2.1 General Characteristics
1. True on-line technology continuously supplies your critical device with
stable, regulated, transient-free, pure-sine-wave AC power.
2. High-efficiency PWM sine-wave topology yields excellent overall
performance.
3. The high crest factor of the inverter handles all high in-rush current loads
without the need to upgrade the power rating.
4. User-friendly plug-and-play design allows hassle-free installation.
5. Built-in maintenance-free, sealed batteries minimize the need for after-
sales service.
6. To protect the unit from overloading, the UPS will automatically switch to
bypass mode in 30 seconds if loading is at 105% of rated capacity. It will
automatically switch back to inverter mode once the overload condition
ceases.
7. Should the output become short-circuited the UPS puts the system in
stand-by mode, provides visible and audible alarms, and cuts the output
supply automatically until the short circuit situation is resolved manually.
To Next Page
Loading...