Bauer Compressors MAXI VERTICUS - 4.2 P5 Purification System; 4.2.1 Component Description

MNL- 0345
Page 78 Section 4 Base Edition
4.2 P5 Purification System
4.2.1 Component Description
The P5Purification System major components are a Coalescing Oil and Water Separator, a Dryer Cham-
ber and a Purification Chamber. Figure 4.2-1 shows the functional interconnection of all the components.
TheP2 purification system is available with the Securus Moisture Monitoring System as a factory
installed option. As part of this option the Purification Chamber is replaced with a Securus
®
Purification
Chamber.
4.2.1.1 Chamber
Each chamber is made up of an anodized aluminum alloy filter housing and a filtering cartridge. There
are two general types of filtering cartridges, drying or purifying. The cartridge type is determined by the
ingredients packed in the cartridge. The chamber is named after the type of cartridge it contains, i.e. dryer
chamber or purification chamber.
Figure 4.2-1 P5 Purification System
1. Coalescing Oil/Water Separator
2. Condensate Drain Valve
3. Check Valves
4. Dryer Chamber
5. Purification Chamber
6. Bleed Valve
7. Pressure Maintaining
Val ve
8. Safety Valve
OUT
IN
7
3
8
1
2
3
4
5
6