Bauer RAINSTAR T42 Series

Questions and Answers

K
Karen WilkinsonAug 14, 2025
What to do if the final shut-off is activated but the shut-off valve does not close on my Bauer Farm Equipment?
- A
  Angela SantiagoAug 14, 2025
  If the final shut-off is activated on your Bauer Farm Equipment, but the shut-off valve doesn't close, it could be due to incorrect settings. Adjust the settings according to the instructions. Alternatively, the thin plastic hose of the shut-off valve might be blocked or broken, in which case you should replace the plastic hose.
W
Wayne PerezAug 17, 2025
Why is the desired retraction speed not reached on my Bauer Farm Equipment?
- B
  Bianca BushAug 18, 2025
  If the desired retraction speed isn't reached on your Bauer Farm Equipment, first select the correct transmission. Also, check if the sprinkler nozzle is blocked and remove any foreign objects. It is also recommended to compare supply pressure and water flow with performance chart values.
R
Renee TuckerAug 21, 2025
What to do if PE-pipe retraction stops before final shut-off activated on Bauer RAINSTAR T42?
- M
  Michelle FloresAug 21, 2025
  If the PE-pipe retraction on your Bauer Farm Equipment stops before the final shut-off is activated, it could be that the turbine is blocked by a foreign object; in this case, remove the foreign object. Another cause may be a pressure drop in the supply line, so check the pumping station and water connection at the hydrant. The safety shut-off may also be actuated by overwinding the PE-pipe, so adjust the winding mechanism. Also, repair the broken winding chain.
J
Jennifer KingAug 26, 2025
Why does the reel overwind during pull-off or the PE-pipe windings become loose on Bauer Farm Equipment?
- R
  Robert HansonAug 26, 2025
  If the reel on your Bauer Farm Equipment overwinds during pull-off, or the PE-pipe windings become loose, gradually slow down, if the tractor stopped abruptly. Also, adjust the brake if the setting is too loose and refill oil if there is no oil in change-speed gearbox.
U
ujohnsonAug 28, 2025
How to fix retraction speed variations between PE-pipe layers on Bauer Farm Equipment?
- H
  hrogersAug 28, 2025
  If the retraction speed varies from one PE-pipe layer to the next on your Bauer Farm Equipment, adjust the speed control system to the ground conditions by changing the rod position on the lever of the layering mechanism.
W
William HollandSep 1, 2025
Why PE-pipe cannot be pulled off on Bauer RAINSTAR T42?
- H
  hwatsonSep 2, 2025
  If the PE-pipe cannot be pulled off on your Bauer Farm Equipment, ensure the gear shift lever is in the correct pull-off position. Also, check if the brake band is sticking on the brake drum and, if so, loosen it.
J
jonesrichardSep 5, 2025
What to do if water is running out at the reel supply (flange bow) of my Bauer RAINSTAR T42 Farm Equipment?
- J
  Jaime NguyenSep 5, 2025
  To resolve the issue of water running out at the reel supply (flange bow) on your Bauer Farm Equipment, replace the damaged lip seal or sealing bush.
N
Nicole TravisSep 8, 2025
What to do if the cart is not lifted on Bauer RAINSTAR T42 Farm Equipment?
- I
  Isaac JonesSep 8, 2025
  If the cart is not lifted on your Bauer Farm Equipment, select the correct gearbox transmission.