What to do if the final shut-off is activated but the shut-off valve does not close on my Bauer Farm Equipment?
If the final shut-off is activated on your Bauer Farm Equipment, but the shut-off valve doesn't close, it could be due to incorrect settings. Adjust the settings according to the instructions. Alternatively, the thin plastic hose of the shut-off valve might be blocked or broken, in which case you should replace the plastic hose.
Why is the desired retraction speed not reached on my Bauer RAINSTAR T32 Farm Equipment?
If the desired retraction speed isn't reached on your Bauer Farm Equipment, first select the correct transmission. Also, check if the sprinkler nozzle is blocked and remove any foreign objects. It is also recommended to compare supply pressure and water flow with performance chart values.
What to do if PE-pipe retraction stops before final shut-off activated on Bauer Farm Equipment?
If the PE-pipe retraction on your Bauer Farm Equipment stops before the final shut-off is activated, it could be that the turbine is blocked by a foreign object; in this case, remove the foreign object. Another cause may be a pressure drop in the supply line, so check the pumping station and water connection at the hydrant. The safety shut-off may also be actuated by overwinding the PE-pipe, so adjust the winding mechanism. Also, repair the broken winding chain.
Why does the reel overwind during pull-off or the PE-pipe windings become loose on Bauer RAINSTAR T32 Farm Equipment?
If the reel on your Bauer Farm Equipment overwinds during pull-off, or the PE-pipe windings become loose, gradually slow down, if the tractor stopped abruptly. Also, adjust the brake if the setting is too loose and refill oil if there is no oil in change-speed gearbox.
How to fix retraction speed variations between PE-pipe layers on Bauer RAINSTAR T32?
If the retraction speed varies from one PE-pipe layer to the next on your Bauer Farm Equipment, adjust the speed control system to the ground conditions by changing the rod position on the lever of the layering mechanism.
Why PE-pipe cannot be pulled off on Bauer RAINSTAR T32 Farm Equipment?
If the PE-pipe cannot be pulled off on your Bauer Farm Equipment, ensure the gear shift lever is in the correct pull-off position. Also, check if the brake band is sticking on the brake drum and, if so, loosen it.
What to do if water is running out at the reel supply (flange bow) of my Bauer Farm Equipment?
To resolve the issue of water running out at the reel supply (flange bow) on your Bauer Farm Equipment, replace the damaged lip seal or sealing bush.
What to do if the cart is not lifted on Bauer RAINSTAR T32?
If the cart is not lifted on your Bauer Farm Equipment, select the correct gearbox transmission.
Description of the CE conformity mark.
Definition and requirements for qualified operators.
Defines the proper application and limitations of the RAINSTAR.
Essential safety guidelines for operating the machine.
Specifies safe operating distances from electrical power lines.
Explains the meaning of various safety stickers and warning symbols.
Overview of the electronic control system.
Details the automatic shut-off features of the machine.
Instructions for safely moving the machine.
Step-by-step guide for assembling the RAINSTAR.
Procedures for setting up the machine for PE-pipe pull-off.
How to adjust the turbine regulation settings.
Instructions for rewinding the PE-pipe using PTO.
Introduction to the ECOSTAR 4300 control system.
Explanation of the display layout and menu structure.
Guide to programming irrigation speeds for different zones.
Understanding the various status messages on the display.
Common constant settings and their implications.
Functionality and operation of the stop sensor.
Additional operational guidance for the ECOSTAR system.
How to adjust the retraction speed of the machine.
Setting up pre- and post-irrigation cycles.
Initiating the irrigation process.
How the system monitors irrigation parameters.
Procedures for stopping the irrigation process.
Function of optional pressure switches.
Common errors and their solutions for the ECOSTAR system.
Step-by-step guide for programming the ECOSTAR system.
Information and maintenance for the machine's battery system.
Information about the solar panel for charging.
How to check electrical connections for the battery system.
Verifying the functionality of the pipe length sensor.
Adjusting turbine limit stops and regulating valves.
A quick checklist for troubleshooting ECOSTAR issues.
Using SMS for remote control and status checks.
Steps for adjusting the pipe winding mechanism.
How to set up the automatic shut-off features.
Adjusting the shifting gate for proper shut-off.
Adjusting the band brake on the gearbox.
Adjusting the break lever for PE-pipe ventilation.
Steps for setting the threaded rod.
Checking the band brake for proper release.
Setting the gearbox shut-off mechanism.
Inspecting the entire shut-off system.
Information on the sprinkler cart (stativ) design and function.
Details on the overpressure shut-off valve.
Details on the low pressure shut-off valve.
Explanation of the combined shut-off system.
Recommended tyre pressure for RAINSTAR models.
Details on standard tyre specifications.
General| Brand | Bauer |
|---|---|
| Model | RAINSTAR T32 Series |
| Category | Farm Equipment |
| Language | English |
To Next Page
