Bauer RAINSTAR T42 Series - 16 SERVICE AND MAINTENANCE

Operation manual for BAUER RAINSTAR Series T32, T42 68
16 SERVICE AND MAINTENANCE
We cannot emphasize often enough that proper service is essential for the operating reliability and service
life of a machine. At the end of every irrigation season the RAINSTAR should be thoroughly checked and
cleaned, and all parts re-greased carefully.
Machine part Service interval Lubricant, grease, oil
1. Helically grooved spindle of the
winding mechanism
every 250 hours multi-purpose grease
(Alvania Grease)
2. Drive chain of winding mechanism every 250 hours multi-purpose grease
(Alvania Grease)
3. Turbine (see separate instruction) every 250 hours multi-purpose grease
(Alvania Grease)e
4. Driver (spindle nut) of winding
mechanism
every 250 hours, change
recommended after 2500 service
hours
multi-purpose grease
(Alvania Grease)
5. Driving chain as required multi-purpose grease
(Alvania Grease)
6. Change-speed gearbox Change oil for first time after 500
service hours and then every 500 to
800 hours or at least once a year
Gear lubricant oil CLP –
DIN 51517 – Teil 3,
ISO VG 220 – 6,3 l
7. Ball race every 500 hours through grease nipple
multi-purpose grease
(Alvania Grease)
8. Jack as required multi-purpose grease
(Alvania Grease) through
grease nipple
9. Shut-off point on the cart lift bracket as required multi-purpose grease
(Alvania Grease)
10. Bolted joint Tightening torques
Turntable side frame 210 Nm
Ball race on turntable and
undercarriage
85 Nm
Trailer coupling 210 Nm
16.1 INSTRUCTION FOR LUBRICATING THE REEL SEAL
In order to ensure durable and trouble-free functioning of the real seal, it must be greased twice every
season