Operation manual for BAUER RAINSTAR Series T32, T42 24
6.6 STARTING PE-PIPE RETRACTION
Couple the pressure hose. Open water supply.
Determine the required retraction speed in the performance chart, depending on nozzle size and
precipitation rate.
The performance start decal is placed on every machine.
Select the speed setting according to the following table.
Note !
Correct gear transmission guarantees economical and fail-safe
performance!.
As soon as the operating pressure is reached and water is ejected from
the wide-range sprinkler in a full jet without air bubbles, switch gear shift
lever to “PE-pipe retraction”. Retraction starts
Set the required retraction speed with the keys in the operating mode of the ECOSTAR
4300.
The retraction speed can be changed any time, also while the machine is operating
See “Retraction speed control with ECOSTAR
To Next Page
Loading...
