Bauer RAINSTAR T42 Series - Setting the Break Lever to Ventilize the Pe-Pipe; Setting of the Threaded Rod

Operation manual for BAUER RAINSTAR Series T32, T42 62
11.4 SETTING THE BREAK LEVER TO VENTILIZE THE PE-PIPE
Put the shut-off lever into the unwind position of the PE – Pipe .
Setting the distance C = 3 mm / 0,12 inch between break lever (13) and nut (4).
Secure the hexagon nuts (4).
11.5 SETTING OF THE THREADED ROD
The hexagon nuts (6) on the threaded rod (7) must be twisted back, to reach a distance of 10 mm between
shut –off lever and the shifting plate(8) according to the sketch.
Secure the hexagon nuts (6).