Baum VisioBook - Common problems and solutions; Display and light remain dark; Image is blurred; Document cannot be read

Common problems and solutions
So now it happened. VisioBook does not work as expected and you are
clueless if it is broken. Very often, a small reason can cause a big problem,
which can be resolved easily. So please read the following checklist and try to
find out what is wrong. If this does not help, please switch VisioBook off,
unplug the power cable from mains and contact our service department.
Display and light remain dark
Please try to switch VisioBook on again. I
f this does not help, make sure power
supply is connected to both VisioBook and wall outlet and that wall outlet is
live. You may want to connect another device to the wall outlet to check.
Are all plugs seated properly in their sockets?
Image is blurred
Check if camera window is dirty.
Turn zoo
m knob in middle position.
Press Auto focus button. It must show „AF ON“, else wise press again.
Document cannot be read
Turn zoom knob clockwise.
Try differe
nt settings of image optimiser button.
Letters are fluttering
Increase the zoom by turning the zoom knob clockwise.
Try differe
nt settings of the Image optimiser button.
Please contact our service department if you encounter any problems or
have questions:
BAUM Retec AG
(Service)
In der Au 22
D-69257 Wiesenbach
Tel.: 06223 / 4909-0
E-Mail: service@baum.de
18