Picture
Use this option to view pictures or documents in true colours.
Also good for viewing bad print and for writing.
If PC is connected, toggle between PC image and camera
image.
Text - Reverse
Use text mode for reading. Contrast is enhanced so reading is
easier. Press again to toggle foreground and background
colours.
False Colours
In text mode: Press to change between 7 false colours. (Use
Text button to reverse foreground and background)
In picture mode: toggle white balance between warm reddish
white, neutral white and cold bluish white.
Getting familiar with your new VisioBook
You have already learned how to position VisioBook on your desk and you
have connected VisioBook to the power supply.
You can slightly move and tilt the display so that you can comfortably view
the screen.
Now, switch on VisioBook and use it for the first time.
The control panel is mounted right below the screen. The power button is
the leftmost one. A short press for about a second on the power button will
switch VisioBook on. As soon as the lights turn on, you may release the power
button. The display shows a start-up screen, after a few seconds VisioBook
shows a magnified image.
You can switch VisioBook off by pressing the power button for more than one
second. Thus, touching this button accidentally will have no effect. Practice
switching on and off for a few times then leave it switched on to proceed.
10
To Next Page
Loading...
