Baumatic BDI632 User Manual

22
o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
At the end of a wash program
o When the wash program is finished a buzzer will sound.
o Open the door of the appliance.
o Use the ON/OFF button to switch the dishwasher off and unload
the dishwasher.
Rinse aid and salt indicator neons
o The rinse aid and salt indicator neons on the
control panel will let you know when the
appliance needs rinse aid or salt adding to it.
o The neon indicates that you need to add rinse aid to the
appliance. You should follow the procedure outlined on page 13.
o The neon indicates that you need to add dishwasher salt to
the appliance. You should follow the procedure outlined on page
11 – 12.
Saving energy using your dishwasher
Loading dishes
o Refer to the relevant section of this manual for instructions on
placing items in the dishwasher for the most efficient cleaning.
o Only run the dishwasher when it is full for optimum energy and
water usage.
o Check the program table to select the most efficient program
according to the size and type of the load.
o The ECONOMY program washes your items at a lower
temperature and uses less water during the cycle. That is better
for the environment and helps to cut energy costs as well as
your water bill if you’re on a water meter.

Baumatic BDI632 Specifications

General

Door color	Not applicable
Control type	Buttons
Built-in display	-
Appliance placement	Fully built-in
Control panel color	Stainless steel
Noise level	53 dB
Dishwashing programs	Eco, Intensive, Normal, Quick, Rinsing + drying
Number of place settings	12 place settings
Number of washing programs	5
Drying class	A
Water consumption per cycle	12 L
Energy consumption per cycle	- kWh

Weight and Dimensions

Depth	540 mm
Width	595 mm
Height	850 mm