Baumatic BDI632 User Manual

24
IMPORTANT: Whilst the filtering system is efficient, your
dishwasher is not a waste disposal unit. All items being
washed inside of the dishwasher should have food scraps
removed from them before being loaded into the appliance.
Cleaning the filters
For best performance and results, the entire filter assembly should be
thoroughly cleaned regularly (ideally after each wash cycle).
1. Turn the coarse filter
anti-clockwise and then
lift it upwards. Rinse out
this section under a tap
to remove any food
debris that remains in it.
2. Pull out the main filter
and rinse this under the
tap to remove any food
debris that is trapped in
it.
3. Pull out the fine filter and
rinse this under the tap
to remove any food
debris that is trapped in
it.
4. Place the fine filter back in its original position.
5. Place the main and coarse filter back into their original positions
in the base of the dishwasher. You must turn the coarse filter
clockwise to lock it back into position.
IMPORTANT: If a glass gets smashed inside of the appliance,
you must check there is no glass in the filter before the
machine is used again as this can cause a drainage failure.
IMPORTANT: THE DISHWASHER SHOULD NEVER BE
SET ON A WASH CYCLE WITHOUT THE FILTERS BEING
INSIDE OF THE APPLIANCE.

Baumatic BDI632 Specifications

General

Door color	Not applicable
Control type	Buttons
Built-in display	-
Appliance placement	Fully built-in
Control panel color	Stainless steel
Noise level	53 dB
Dishwashing programs	Eco, Intensive, Normal, Quick, Rinsing + drying
Number of place settings	12 place settings
Number of washing programs	5
Drying class	A
Water consumption per cycle	12 L
Energy consumption per cycle	- kWh

Weight and Dimensions

Depth	540 mm
Width	595 mm
Height	850 mm