Baumatic BDI632 User Manual

25
Cleaning the spray arms
The spray arms should be cleaned regularly, to prevent hard water
deposits from clogging the spray arm jets and bearings.
o To remove the spray arm, unscrew the nut and take out the
washer that sits on top of the spray arm.
o Gently pull upwards to remove the spray arm.
o Wash the spray arm in warm, soapy water and use a soft brush
to clean the jets.
o Rinse the spray arm thoroughly and then reassemble the spray
arm back in its original position.
Cleaning the control panel
IMPORTANT: Do not use any abrasive cleaner or household polish on
either the control panel or operating parts.
o Wipe over the control panel using a brand new damp cloth with
warm water.

Baumatic BDI632 Specifications

General

Door color	Not applicable
Control type	Buttons
Built-in display	-
Appliance placement	Fully built-in
Control panel color	Stainless steel
Noise level	53 dB
Dishwashing programs	Eco, Intensive, Normal, Quick, Rinsing + drying
Number of place settings	12 place settings
Number of washing programs	5
Drying class	A
Water consumption per cycle	12 L
Energy consumption per cycle	- kWh

Weight and Dimensions

Depth	540 mm
Width	595 mm
Height	850 mm