Baumatic BFD46 - Starting a Wash Cycle

BAUMATIC BFD46W dishwasher user manual
12
STARTING A WASH CYCLE
1) MAKE SURE THAT THE PLUG OF THE APPLIANCE IS INSERTED INTO THE WALL SOCKET.
2) MAKE SURE THAT THE WATER SUPPLY IS TURNED ON TO FULL PRESSURE.
3) LOAD THE DISHWASHER (SEE THE SECTION ENTITLED ‘LOADING YOUR DISHWASHER’).
4) POUR IN DETERGENT (SEE THE SECTION ENTITLED ‘SALT, DETERGENT & RINSE AID’).
5) TURN THE KNOB LOCATED ON THE RIGHT OF THE CONTROL PANEL CLOCKWISE UNTIL THE
DIAL
POINTS TO THE SYMBOL FOR THE CYCLE SETTING. SEE THE ‘WASH CYCLE TABLE’ ON
THE
NEXT PAGE.
6) PRESS THE ON/OFF BUTTON – THE ON/OFF LIGHT WILL TURN ON. AT THIS POINT, THE WASH
CYCLE
WILL BEGIN.
.
Approximate Timing of Wash Cycles
Intensive
12
Normal
(strong) 114
mins.
Economy
108
mins.
Rinse
90
mins.
Glass
76
mins.
Rapid
50
mins.
Soap
30 7
mins. mins.