EasyManua.ls Logo

Baumatic BFD46 - How to Keep Your Dishwasher in Shape

Baumatic BFD46
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BAUMATIC
BFD46W
dishwasher user manual
17
HOW TO KEEP YOUR DISHWASHER IN SHAPE
A
FTER
E
VERY
W
ASH
, leave the door slightly ajar so that moisture and odours are not trapped
inside.
R
EMOVE
THE
P
LUG
before cleaning or performing maintenance. Never run the risk of electric
shocks.
D
O
N
OT
U
SE
S
OLVENTS
OR
A
BRASIVE
C
LEANING
A
GENTS
to clean the exterior and the rubber
parts of the dishwasher. Only use a cloth and warm soapy water. To remove spots or stains
from the surface of the interior, use a cloth dampened with water and a little white vinegar,
or a cleaning product made specifically for dishwashers.
W
HEN
YOU
G
O
ON
H
OLIDAY
, run a wash cycle with the dishwasher empty. Then unplug it, turn
off the water supply and leave the door slightly ajar to prevent odours and mould from
developing.
M
OVING
THE
A
PPLIANCE
is possible but KEEP IT UPRIGHT.
S
EALS
can trap food, which in turn will cause odours. Periodic cleaning with a damp cloth or
sponge will prevent this from becoming a problem.
PROTECTING
OUR
ISHWASHER
AGAINST
FREEZINGY D
17
If your dishwasher is left in an unheated place during the winter, ask a
service technician to:
1)
Cut off electrical power to the dishwasher. Remove fuses or trip circuit
breaker.
2)
Turn off the water supply and disconnect the water inlet pipe from the water
valve & discharge hoses.
3)
Drain water from the inlet pipe and water valve (Use a pan to catch the
water).
4)
Reconnect the water inlet pipe to the water valve.
5)
Remove the plastic sump cover in the tub bottom and use a sponge to soak
up water in the rubber boot.

Related product manuals