Baumatic BFD46 - Final Checklist before Starting

BAUMATIC BFD46W dishwasher user manual
28
AT THE BOTTOM RIGHT DIAGRAM ON PAGE
24).
IT’S IMPORTANT TO MAKE SURE
THAT YOUR DISHWASHER IS
LEVEL AGAIN, BECAUSE THE
FLOOR SURFACE MAY BE
DIFFERENT TO WHERE YOU HAD
ADJUSTED IT BEFORE YOU MOVED
THE DISHWASHER INTO PLACE
WARNING! BE CAREFUL WHILE YOU ARE LEVELLING YOUR DISHWASHER IN PLACE
– IT COULD TIP OVER AND INJURE YOU!
FINAL CHECKLIST BEFORE OPERATING
NOTE: BEFORE YOU START USING YOUR DISHWASHER,
PLEASE MAKE SURE YOU HAVE CHECKED
:
• WHETHER THE DISHWASHER IS LEVEL AND
FIXED.
• WHETHER THE INLET VALVE IS OPENED.
• WHETHER THERE IS LEAKAGE AT THE
CONNECTIONS OF THE CONDUCTS.
• WHETHER THE WIRES ARE TIGHTLY
CONNECTED.
• WHETHER THE POWER IS SWITCHED ON.
• WHETHER THE INLET AND DRAIN HOSES
ARE KNOTTED / KINKED.
• WHETHER ALL PACKING MATERIALS &
PRINTED MATTER HAVE BEEN REMOVED
FROM THE DISHWASHER.
PLEASE EEP THIS MANUAL FOR FUTUREK
28
REFERENCE