BAUMATIC
BFD46W
dishwasher user manual
16
CLEANING THE FILTERS
•
THE FILTER ASSEMBLY MUST BE KEPT CLEAN FOR BEST PERFORMANCE. You should remove the
larger bits of food trapped in the filter after each wash cycle by rinsing the semicircular filter and
cup under running water. To remove the filter assembly, pull up on the cup handle.
•
The entire filter assembly should be cleaned at least once a month.
•
To clear the coarse filter and the fine filter, use a cleaning brush. Then, reassemble the filter parts
as shown in the figure above and reinsert the entire assembly in the dishwasher in its seat & press
downward to secure it.
•
Improper replacement of the filter may impair appliance performance and damage dishes and
utensils.
•
Warning
-
never
run
the
dishwasher
without
the
filters
in
place!
•
Warning
- Before cleaning
the
inner
cavity
of
the
appliance
always
allow
30
minutes
for
the
Element
to
cool
down
to
avoid
injury!
16
To Next Page
Loading...
