Installing your fridge freezer
a) Place the appliance into
the housing unit.
Position the appliance
towards the left hand
side wall, leaving a gap
of approximately 5 mm.
o IMPORTANT: If you
have reversed the door
of the appliance, then
the 5 mm gap should
be on the opposite
side.
b) Fix the appliance to the
top shelf of the housing
unit.
o IMPORTANT: This will help to keep the appliance vertically
parallel with the décor doors. If the housing unit has no top
shelf, then we recommend that you install one before continuing
with the rest of the installation.
25
To Next Page
Loading...
