o You should leave the oven on maximum setting for 30 – 40
minutes.
12
warm soapy water, using either a sponge or soft cloth. No abrasive
Outer parts of the oven should be cleaned with warm soapy water,
is regularly used on the stainless steel surfaces of this
appliance.
he oven function selector knob should be used to select the particular
cted, the power indicator light will
ome on.
OVEN LIGHT: Separate light control which allows the light to
hen the oven is not cooking.
DEFROST MODE: The fan runs without heat to reduce the
time of frozen foods. The time required to defrost
he food will depend on the room temperature, the quantity
imultaneously on different shelves,
preventing the transmission of smells and tastes from one dish
o After the oven cavity has cooled, it should then be cleaned with
cleaners should be used.
o
using either a sponge or soft cloth. No abrasive cleaners should be
used.
o We would recommend that an appropriate stainless steel cleaner
and polish
Selecting an oven function
T
mode of cooking that you require. The appliance will utilise different
elements within the oven cavity, depending on the oven function that
you select. When a function is sele
c
Oven functions
be switched on, even w
HALF GRILL: This method of cooking utilises the inner part
only of the top element, which directs heat downwards onto
the food. This function is suitable for grilling small portions of
bacon, toast and meat etc.
defrosting
t
and type of food. Always check food packaging for the
defrosting instructions.
FAN OVEN: This method of cooking uses the circular element
while the heat is distributed by the fan. This results in a faster
and more economical cooking process. The fan oven allows
food to be cooked s
onto another.
To Next Page
Loading...
