12
o You should leave the oven on maximum setting for 30 – 40
n be cleaned with
warm soapy water, using either a sponge or soft cloth. No
he oven should be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
ecommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
minutes.
o After the oven cavity has cooled, it should the
abrasive cleaners should be used.
o Outer parts of t
should be used.
o We would r
appliance.
Timer functions
The minute minder function
The minute minder function is a countdown time that can be set on the
ven programmer/timer. When the countdown time has finished, an
Press and hold down the programme button (12) until the
o Use the plus (11) and minus (13) buttons to set the countdown
o The maximum countdown time that can be set is 23 hours and
rect countdown time appears on the LED display,
release the plus and minus buttons and the countdown will start
o The oven in use symbol (8) will appear on the LED display to
o After a few seconds the LED display will return to showing the
signal will
sound for 7 minutes before switching off or you can silence it by
pressing any of the oven programmer/timer buttons.
o
audible signal will sound.
o
decimal point starts to flash to enter programming mode.
time that you require.
59 minutes.
o When the cor
immediately.
show that a countdown time is in progress.
time of day.
o At the end of the countdown time, an audible signal will sound
and the oven in use symbol will go out. The audible
To Next Page
Loading...
