26
o Care must be taken to ensure that the temperature of the mains
om the
ositioning the appliance
t the aperture that you will be fitting the oven into is
of the size given in the above diagram.
The oven must be fitted into an oven housing with the ventilation
cut-outs shown in the “Ventilation requirements” section on the
next page.
o Ensure that the rear panel of the furniture housing unit has been
removed.
supply cable does not exceed 50°C.
o If the mains supply cable is damaged, then it must be replaced
by an appropriate replacement which can be obtained fr
Spares Department.
Installing the oven into a kitchen cabinet
P
o Ensure tha
o
To Next Page
Loading...
