20
o If the mains supply cable is damaged, then it must be replaced
by an appropriate replacement which can be obtained from the
nsta
o The oven must be fitted into an oven housing with the ventilation
o Ensure that the rear panel of the furniture housing unit has been
removed.
o Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
Spares Department.
I lling the oven into the kitchen cabinet
Positioning the appliance
o Ensure that the aperture that you will be fitting the oven into is
of the size given in the above diagram.
cut-outs shown in the “Ventilation requirements” section on the
next page.
To Next Page
Loading...
