USER INSTRUCTIONS
11
REMOVING THE OVEN DOOR
To facilitate cleaning the oven, the doors can be removed as follows (see Fig. 3):
1. With the door in the fully open position, swivel the catch on the lower hinge arms and clip
them over the hook on each upper hinge arm.
2. Hold the door on each side, then lift to unlock the hinge mechanism and pull outwards to
release from the oven.
3. To refit, hold the door in the fully open position and slide the hinge arms into the oven
recesses until the arms lock in position.
4. Release the hinge clips and close the door fully to complete the refitting.
IMPORTANT NOTES:
• Take care not to dislodge the hinge lock system when
removing the door as the hinge mechanism has a
strong spring system!
• The door on model BT2450 is very heavy and
requires two persons to carry out this operation.
• Do not immerse the door in water at any time.
Fig. 3 Oven Door Hinge
To Next Page
Loading...
