35
e.
9 Consult the rating
plate, located on
the inner rim of the
porthole door of the
appliance BEFORE
making the
electrical
connections. Ensure
that the voltage
reaching the plug,
is the same as that
on the rating plat
9 DO NOT REMOVE THE RATING PLATE AS THE
INFORMATION ON IT IS IMPORTANT.
9 The moulded plug that is supplied with the appliance must be
placed into an earthed and insulated socket.
9 Broken or damaged power leads must only be replaced by a
suitably qualified person. A power lead of a similar type must be
used in replacement.
9 Power lead type – H 0 V V – F 3G 1,5.
9 IMPORTANT: We do not recommend that this appliance is
connected to an extension lead.
Before first use maintenance wash
o When your washer dryer has been correctly installed, we
recommend that you perform a maintenance wash cycle.
o This will check that all aspects of the installation are correct; it will
also remove any deposits that may have been left on the drum by
the manufacturing process.
o Select a Normal 90°C wash program.
To Next Page
Loading...
