16
o The washing machine automatically selects a spin speed for a
particular wash program. However it is possible to alter the spin
speed by using the spin button. All spin speeds will not be available
on certain wash cycles.
o Important: You should make sure that the selected spin speed is
appropriate for the garments that you are washing.
o Important: Before opening the door of the appliance, you MUST
spin the clothes and drain the water. See the section called “Spin
only”.
o The active phases will appear at the top of the LED display, as the
wash program progresses.
o The LCD display shows an approximate time for the selected wash
cycle. Please note that factors external to the machine, e.g. the
temperature of your water supply, your water pressure etc. can
affect the time it takes for a wash cycle to complete.
Selecting a wash program
Cotton program
o Put the laundry into the drum and then close the door. The
maximum load size is 9kg for a cotton wash.
o In the detergent drawer, put detergent into the main wash and
pre-wash compartments.
o Put detergent into the pre wash compartment only if you want to
use the pre-wash option.
o Softener should be poured into the middle compartment of the
detergent drawer; the level should be below the ‘MAX’ level.
o If you want to use bleach, then you should put it into the main
wash compartment with your detergent.
• Press the power button (1), the LCD display will show “---“ and
all the program lights will come on.
• If you press the start/pause button (2) next without selecting a
program, the cotton/normal wash will be selected as the default
program.
• Alternatively you can use the wash program selection knob (3)
to select the cotton program.
To Next Page
Loading...
