19
Intensive program
o Put the laundry into the drum and then close the door.
o Put detergent into the main wash and pre-wash compartments in
the detergent drawer. Softener should be below the ‘MAX’ level.
o Put detergent into the pre-wash compartment only if you want to
add pre-wash.
o When you want to use bleach, put it into the main wash
compartment with detergent.
o Press the power button (1). The LED shows only “---“ and all
program lights will turn on.
o Select the intensive program using the program selection dial
(3). The machine will set a washing temperature of 60°C and a
spin speed of 1000rpm. If you want to change the washing
temperature (4), the spin speed (5) or add wash options (pre-
wash or soak) (6) or a rinse (11), then press each button
accordingly.
o Press the start-pause button (2). The door will lock and the
machine will supply wash water depending on the weight of the
laundry. The appliance will then begin washing.
Quick 20 program
o Put the laundry into the drum and then close the door. The
maximum wash load size is below 3kg for the Quick 20 wash
program.
o In the detergent drawer, put detergent into the main wash
compartment.
o Softener should be poured into the middle compartment of the
detergent drawer; the level should be below the ‘MAX’ level.
o If you want to use bleach, then you should put it into the main
wash compartment with your detergent.
• Press the power button (1), the LCD display will show “---“ and
all the program lights will come on.
• Use the wash program selection knob (3) to select the Quick 20
program.
To Next Page
Loading...
