EasyManua.ls Logo

Baumatic BWM5001 - Selecting a Wash Program; Starting and Pausing Programs

Baumatic BWM5001
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Selecting a wash program
Detergent
o If you are placing detergent directly into the drum, you should
dilute it first (See ‘Detergent Drawer’ section).
o Alternatively, put detergent powder into the detergent drawer.
Please see the table below for recommended amounts according to
the water level and weight of laundry.
o For a normally soiled full load, dissolve dry powder detergent in
warm water before adding.
o Use low sudsing detergent.
Washing load size
o The water level and amount of detergent required largely depends
on the size of the wash load. By calculating the total weight of your
items you can choose the most suitable wash program options.
o For a general guide to the weight of various laundry items, please
see the table below.
Laundry item Approximate weight
(g)
1 x Sheet 400-500
1 x Pillowcase 150-200
1 x Quilt cover 700
1 x Tablecloth 400-500
1 x Teacloth 100
1 x Bathrobe 900-1200
1 x Towel 500
1 x Pair of Denim
400-500
1 x Shirt 150-200
1 x Nightdress 200
Underwear 100
IMPORTANT: The weights stated in the above table are
approximate. The weight of individual items can vary
depending on fabric, size and quality.
Beginning the wash program
o Once you have set the correct wash program, you should check that
the lid is securely closed and then press the start / pause button
(2) to begin the program.
o If you wish to pause the program at any time then press the start /
pause button (2), and then press it again to resume.

Related product manuals