o The drain hose should not be positioned any higher than 90 cm
as this will cause drainage problems.
o You can place the end of the drain hose in your drain pipe. Push
it a short way down into your drain pipe (max 100mm).
IMPORTANT: Do not insert the drain hose too deeply into the
water pipe, as this may cause siphoning. The drain hose should be
loosely fitted and not sealed.
o Alternatively, you can place the end of the drain hose into a sink.
You can secure the hose to the tap to hold it in position.
o ALWAYS use an elbow to bend the drain hose at a proper
bending angle. Fix it well when using the elbow.
o NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL
LENGTH.
o You should ensure that the drain hose is not kinked or
knotted before using the machine.
Power supply
33
o IMPORTANT: The
electrical socket must
still be a
ccessible once
the appliance is
installed.
o Consult the rating plate BEFORE making the electrical
connections. Ensure that the voltage reaching the plug is the
same as that on the rating plate.
o DO NOT REMOVE THE RATING PLATE AS THE
INFORMATION ON IT IS IMPORTANT.
To Next Page
Loading...
