Changing a light bulb
IMPORTANT: BEFORE ATTEMPTING TO CHANGE
A LIGHT BULB, YOU MUST ENSURE THAT YOU
HAVE DISCONNECTED THE COOKER HOOD FROM
YOUR MAINS SUPPLY.
o Prior to touching the light bulbs ensure
they are cooled down.
o Find the bulb that requires replacement,
you will find it located in the light fixture
which is on the underneath of the
cooker hood.
13
o Using a flat tipped screwdriver, remove the bulb and
insert a new GU4 12V 20W (max) bulb.
o IMPORTANT: Defective bulbs should be replaced
immediately.
o If the light or lights still do not work, make sure that the lamps
are fitted properly into their housings before you call for
technical assistance.
To Next Page
Loading...
