Installing above a built under oven
IMPORTANT: If you are building this hob above an oven, the
oven MUST have a cooling fan.
o There must be a gap of at least 50 mm between the underneath
of the appliance and the top of the oven.
o You must make sure that there is a 5mm gap below the
underneath of the worktop at the front edge of the hob.
Unpacking the appliance
When unpacking the appliance please check that the following items
are contained within the packaging:
1 Baumatic hob
1 Ceramic hob scraper
1 Installation and instruction manual
1 Baumatic guarantee card
4 Fixing brackets
4 Fixing screws
1 Sealing strip
23
To Next Page
Loading...
