Environmental condition
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
222
of 328
9.1
9.1 Environmental condition
If the prescribed environmental conditions are adhered to, then the device is mainte-
nance-free. For the prescribed environmental conditions, see ZRequ
ired environmental
conditions– o
n page 47.
The most important prescribed environmental conditions are:
m Dus
t-free environmental air
m T
emperature: Min. 5 °C to max. +55 °C
m Relativ
e humidity: 5% to 85%, no condensation
m In
stallation altitude: From 1000 m and higher derating
9.2 Inspection intervals - maintenance notes
Preventive maintenance is prescribed to keep the device in an optimum operating condi-
tion and ensure a long service life. It is reco
mmended to have inspections performed reg-
ularly by qualified personnel.
Daily
inspection:
Basic check points as to whether discrepancies have occurred during operation:
m Doe
s the motor work as desired?
m Is th
e operating environment normal?
m Is th
e cooling system working normally?
m If an un
usual vibration or noise is noticed during operation.
m Doe
s the motor overheat during operation?
Regularly sched-
uled inspection:
Before checking, switch off the input voltage a
nd wait until the device's capacitors have
discharged.
DANGER!
Risk of fatal injury from electrical current!
Therefore:
m Switch
off voltage before performing work!
m Only
qualified personnel may mount, install and maintain the devices.
m Please remov
e all metallic objects worn, such as watches or rings, for example,
before beginning to work on the device.
m On
ly insulated tools are permitted.
To Next Page
Loading...