Transport, Removal of Packaging
Basic Supply Unit BUG 622, 623 17
Baumüller Nürnberg GmbH 5.94034.07a
3 TRANSPORT, REMOVAL OF PACKAGING
The units are packed at the factory in accordance with the order.
Avoid strong shaking during transportation and shocks, e.g. when setting the units down.
After unpacking the units and checking that the shipment is complete and undamaged, you can start
assembly.
The packing consists of fibreboard, corrugated cardboard and/or wood. It can be disposed according to
the local regulations.
Report any transport damage without delay.
DANGER
If you detect a transport damage on the unit, it must not be connected unless an appropriate voltage
test has been carried out.
Ignoring this information can result in death, severe personal injury or considerable damage to
material assets.
To Next Page
Loading...
Need help?
General
