Safety Notes
Basic Supply Unit BUG 622, 623 7
Baumüller Nürnberg GmbH 5.94034.07a
Normal use
Voltage test
BAUMÜLLER carries out a voltage test according to EN 50178 / VDE 0160 /4.98, Section 9.4.5 for
each unit.
Subsequent high-voltage tests must only be carried out by BAUMÜLLER NÜRNBERG GmbH.
WARNING
The unit/system may only be used as specified in the system handbook, and only with other units
and components recommended or approved by BAUMÜLLER NÜRNBERG GmbH.
Unauthorised conversion of the unit/system is not permitted for safety reasons.
The user is obliged to report any changes which may affect the safety of the unit/system immediately.
WARNING
If you want to carry out high-voltage tests for complete switch cabinet installations, disconnect all
cables from BAUMÜLLER units prior to the test.
To Next Page
Loading...