TAM 00609 6
DA 100 – 280 03 / 2015
Three phase asynchronous motor air cooled Englisch
Thermal hazards:
Caution! Highly inflammable!
Temperatures of over 70°C can build up on the motor surfaces. Touch contact measures must
be implemented if necessary!
Temperature-sensitive parts, such as normal cables or electronic components, must not be
placed on or fixed to the hot surfaces.
Thermal overloading can destroy the winding and the bearing. A thermal sensor
should be used to monitor the temperature.
Prohibition of unauthorized modifications and changes 1.3
For safety reasons, unauthorized modifications and changes to the electric motor are not permit-
ted. If such modifications / changes are necessary, please contact the motor manufacturer.
No safety devices may be dismantled or decommissioned prior to the operation of the device.
2 Operating conditions
Product description 2.1
Electric motors of the series „DA…“ are 4-pin, air-cooled three-phase asynchronous motors. This optimized
forced ventilation assures an efficient cooling which allows a high torque and power density at a high enclo-
sure (such as IP54).
When operated at a motor-controlled converter these rugged motors can be controlled dynamically in speed
and position and are ideally suited for applications in machine tools and manufacturing machines.
Scope of supplies 2.2
The delivery is put together on an order-related basis.
• The carrier must immediately be notified of any damage caused during transport.
• On delivery, please check that the ratings and motor type correspond with the order data. In the event of
apparent defects or incomplete delivery, the appropriate Baumüller office or the Baumüller head office in
Nuremberg should be notified immediately.
In both of the above cases, commisioning may not be made until the error has been fixed correctly.
To Next Page
Loading...
