TAM 00621 21
DSD 45-100 05/2007
Three-phase synchronous motor English
Warranty and liability
All the details in this documentation are provided by way of customer information. They are not
legally binding, are subject to a process of continuous development and are updated by our
editing staff on a continual basis. Warranty and liability claims against Baumüller Nürnberg GmbH
are excluded, particularly where the loss or damage is caused by one or more of the following:
- You have not followed the instructions in this documentation.
- You have not used the system for its designated purpose.
- You have
• Mounted, installed, commissioned or operated the system incorrectly or
have not carried out the required maintenance
• Permitted the system to be mounted, installed, operated and/or maintained by
unqualified or insufficiently qualified personnel.
• Overloaded the system
• Operated the system with
o Faulty safety devices
o Safety devices that were incorrectly fitted or not fitted
o Safety devices or protective devices not in working order.
• Not operated the system in the stipulated ambient conditions.
- You have modified the system without the written approval of Baumüller Nürnberg GmbH.
- You have not observed the instructions concerning maintenance in the component
descriptions.
- You have not monitored parts subject to wear sufficiently.
- You have failed to carry out a repair correctly.
- You have combined the system with products from other manufacturers in an improper
manner.
- You have combined the drive system with faulty and/or incorrectly documented products
from another manufacturer.
The "General Conditions of Sale and Delivery" Version 1.1 of February 15, 2002 or the latest version
drawn up by Baumüller Nürnberg GmbH shall always apply.
These are available to you at the latest on the conclusion of the contract.
To Next Page
Loading...
Need help?
General
