TAM 00621 4
DSD 45-100 05/2007
Three-phase synchronous motor English
1 General safety instructions
1.1 Safety
This electric motor has been constructed in accordance with the relevant safety standards and
underwent an operational safety check before leaving our factory.
To ensure that it is commissioned and used correctly, please comply with the following:
• These Commissioning and Maintenance Instructions
• The enclosed safety and commissioning notes
• The technical documentation that accompanies the product
• The commissioning and safety notes provided by the manufacturer of the converter
• The national, local and system-specific regulations concerning your finished product.
We wish to draw your attention to the following hazards when using the product:
Hazards resulting from • Lifting and transport
• Electrical power
• Moving parts
• Hot surfaces
• Electromagnetic interference
• Mechanical overload
• Thermal overload
In the interests of avoiding personal injury and damage to property as well as minimizing residual
risks, please read all of the safety instructions and, in particular, those that are marked with a
symbol.
Risk of fatality due to electrical shock
Failure to observe can lead to fatal or serious injuries.
Warning about general dangers
Failure to observe can lead to serious injury or damage to property.
Warning about dangerous situation
Failure to observe can lead to damage to the system or peripheral equipment.
Do not touch
Failure to observe can lead to serious injury.
Action prohibited
Failure to observe can lead to serious injury.
Warning about hot surface
Failure to observe can lead to serious injury.
Electrostatically sensitive components
Failure to observe can lead to damage to the system or peripheral equipment.
To Next Page
Loading...
Need help?
General
