formed during previous operations.
iv) If operating the appliance for
long periods it is beneficial
occasionally to
change the settings. This will also
help to remove any carbon deposits
that may form during operation.
Glass bowing.
It is normal for the glass panel on the
fascia to bow slightly when hot.
Lighting with a taper.
(See figure 6).
In the unlikely event of failure of the
ignition spark, the pilot can be lit by a
taper or long spill. Insert the taper or spill
into the gap in the fuel effect at the left hand
side. Depress the control knob, turn it to
PILOT/IGN
To turn off.
! To turn the main burner off but leave the
pilot alight, partially depress the knob and
turn to PILOT/IGN.
! To turn the fire fully off, partially depress
the knob and turn to OFF.
! Wait at least three minutes before
relighting.
! While cooling, the fuel effect may make
some crackling noises. This is quite normal.
Page 9
OWNER GUIDE
effect may differ from that shown)
Figure 5. Control knob (On ‘Landscape’
and ‘Serenity’ models the control knob
and indicator button will be spaced away
from the support leg).
To Next Page
Loading...
