Need help?Do you have a question about the Baxi Bermuda 401 and is the answer not in the manual?
Details the items included in the boiler kit.
Specifies dimensions for the builders opening.
Details requirements for fireplace surrounds.
Describes various locations and positions for installing the boiler.
Step-by-step guide for physically installing the boiler into the opening.
Details how to correctly size pipes for the heating system.
Offers tips for optimizing fuel usage and efficiency.
Explains system configurations for fully pumped heating.
Describes a fully pumped system using a single zone valve.
Details a fully pumped system with two zone valves.
Explains system setup using a diverter valve.
Covers system designs for gravity domestic hot water.
Describes a gravity system using sundial control.
Illustrates the boiler components with a numbered diagram.
Details the servicing procedures for the boiler and its combustion area.
Focuses on the maintenance of the burner and control components.
Instructions for replacing the thermocouple.
Steps for replacing the spark electrode.
Procedure for replacing the piezo ignition unit.
Instructions for replacing the boiler burner.
Guide for replacing the optional overheat thermostat.
Specific steps for the wall mounting process.
To Next Page
General