Need help?Do you have a question about the Baxi Bermuda SP3 and is the answer not in the manual?
Details concerning Refractory Ceramic Fibres (R.C.F.) and safe handling practices.
Specifies the required height, width, and depth for the fireplace opening.
Details the necessary ventilation air supply and area size requirements.
Mandatory installation procedures and requirements for GB and IE installers.
Detailed instructions for making electrical connections to the fire unit.
Crucial safety warning about the necessity of earthing the appliance.
Instructions for wiring electronic control models, including lighting effects.
Specific wiring instructions for the 51/5 electronic control model.
Steps for fixing the fire unit to the hearth, including adjustments and securing.
Steps for securing the fire unit using wall fixing plates and screws.
Turning on gas, purging the system according to regulations.
Igniting the pilot using the control knob and checking its operation.
Checking setting pressure and performing flue spillage detection.
Procedure for annual servicing of the Bermuda VP3 unit.
Essential safety step to isolate gas and electricity before servicing.
Procedure for annual servicing of the Bermuda SP3 unit.
Steps to disconnect the fire unit from the boiler for separate servicing.
Detailed steps for replacing the pilot and A.S.D. assembly.
Detailed steps for replacing the control tap and micro-switch.
Diagnosing and resolving problems with pilot ignition and spark generation.
Flowchart for diagnosing why the fire fails to remain alight.
To Next Page
General