Need help?Do you have a question about the Baxi Bermuda SP3 Renewal and is the answer not in the manual?
Lists Baxi Bermuda models for Natural Gas, Propane Gas, and Renewal.
Lists relevant British and Irish Codes of Practice for gas installations.
Stresses adherence to instructions and regulations by competent persons.
Emphasizes the importance of the Log Book for warranty and service records.
Covers safe installation, gas leak procedures, servicing, electricity, and fault handling.
Describes the Baxi Bermuda SP3/VP3 as a combined boiler and gas fire.
Details how to open the control access panel and remove the fender front.
Step-by-step guide for lighting the boiler pilot light using manual controls.
Instructions for operating the boiler once the pilot light is established.
Describes boiler reset and lighting procedures for the fire.
Details fire control settings, turning off the fire, and light effect.
Provides methods for shutting down the boiler for short or long periods.
Recommends using a nursery guard for added safety with the hot glass panel.
Specifies minimum clearance distances and access for bulb replacement.
Provides instructions for cleaning the fire and wall finish requirements.
Explains the function of the pilot light as an Atmospheric Sensing Device (ASD).
Details procedures for glass frame and bulb replacement.
Instructions for lighting the pilot light using a match during power outages.
Guidance on how to identify and obtain spare parts for the appliance.
Outlines the terms, duration, and how to maximize the Baxi Bermuda guarantee.
To Next Page
General