What to do if my Baxi ECO5 BLUE is switching off due to power supply reductions?
The Baxi Boiler will automatically reset at voltages in excess of 170V. If this fault persists, it is recommended to call the Authorised Service Centre.
What to do if my Baxi Boiler shows 'Defrosting function enabled'?
Wait for defrosting to occur or call the authorised technical assistance centre.
What to do if my Baxi ECO5 BLUE has no hydraulic pressure switch enable?
Check that the pressure in the system is correct; See the FILLING THE SYSTEM section.
What to do if my Baxi ECO5 BLUE heating circuit overheated/ no water safety trip (pump probably blocked)?
If this fault persists, call the Authorised Service Centre.
What to do if my Baxi Boiler has parasite flame (flame error)?
If this fault persists, call the Authorised Service Centre.
How to fix safety error due to ignition failure/frequent flame loss in my Baxi ECO5 BLUE Boiler?
To address this issue, press and hold down for at least 2 seconds.
How to fix a failed ignition shutdown in my Baxi ECO5 BLUE?
To resolve a failed ignition shutdown, press and hold down for at least 2 seconds.
What to do if my Baxi Boiler is shut down by safety thermostat?
To resolve this, press and hold down for at least 2 seconds.
What to do if my Baxi ECO5 BLUE has no water safety trip (pump probably blocked)?
Press and hold down for at least 2 seconds.
Explains critical symbols like danger of burns, high voltage, freezing, fire hazard, and general warnings.
Symbols indicating important information or generic prohibitions for correct operation.
Critical procedures for gas/fume smells, flammable materials, and safety during servicing.
Precautions for system preparation, installation, and initial commissioning by a qualified engineer.
Specific instructions for the Domestic Hot Water (DHW) and heating circuits, including water hardness and cleaning.
Tips for adjusting heating flow and DHW temperatures for optimal energy efficiency.
Step-by-step guide for lighting the boiler and adjusting heating and DHW temperatures.
Explanation of Summer, Winter, Off modes, and their display indications.
Instructions for filling the heating system, including pressure checks and air prevention.
Guidance on switching off, gas conversion, and protecting the boiler during prolonged shutdowns and winter.
Importance of regular servicing and how to handle fault codes, including unlisted ones.
Requirements before installation, warnings, and steps for mounting the boiler.
Safety for electrical connections, accessing terminals, and connecting room thermostats.
Procedure for connecting an external probe accessory.
Detailed steps for converting gas type and calibrating the gas valve.
How to parameterize the electronic board after replacement.
How to use the "INFO" function to view operational parameters and error history.
Guide on navigating, editing, and saving various boiler parameters.
Detailed table of faults, their possible reasons, and service actions for common error codes.
Instructions on what to do if a fault code is not listed or if a fault occurs frequently.
Description of key safety devices like limit thermostat, fumes thermostat, and pressure switch.
Explanation of features like pump anti-block, anti-freeze, and hydraulic safety valve.
Reference to pump performance charts and data.
Safety precautions before servicing and a list of annual inspection points.
Specific maintenance procedures for the hydraulic unit, electrode, and filter.
Instructions on measuring combustion parameters and air temperature.
Guidelines for safe dismantling, disposal, and recycling of the appliance.
Summary of the boiler's model and key technical specifications.
Detailed technical parameters related to energy efficiency and consumption.
Overview of the product's key performance and energy efficiency data.
General| Gas | Natural Gas |
|---|---|
| Efficiency Class | A |
| ERP Rating | A |
| NOx Class | 5 |
| Maximum Working Pressure | 3 bar |
| Fuel | Natural Gas |
| Mounting | Wall-mounted |
| Heating Flow Temperature Range | 30°C - 80°C |
To Next Page