49
7113868.01 - en
INSTRUCTIONS FOR FITTERS
N.B.: The resetting operation is available only for 5 consecutive attempts, after which the gas boiler remains blocked.
To carry out a new RESET attempt, proceed as follows:
rQSFTT
selecting “OFF” (as described in section
rQSFTT
for about 2 seconds, the display shows
“OFFu
.
rSFTFUUIFCPJMFSPQFSBUJOHNPEF
See section 9 for error codes and anomalies description.
r
Press the +/- domestic hot water ( ) buttons to display the following instantaneous information:
A00: EPNFTUJDIPUXBUFSUFNQFSBUVSFWBMVF$
A01: PVUTJEFUFNQFSBUVSFXJUIFYUFSOBMQSPCFTFOTPSDPOOFDUFE
A02: NPEVMBUJPODVSSFOUWBMVFN".&5)"/&N"-1(
A03: QPXFSSBOHFMFWFMWBMVFTFFQBSBNFUFS'TFDUJPO
A04: UFNQFSBUVSFTFUQPJOUWBMVF$
A05: DFOUSBMIFBUJOHáPXUFNQFSBUVSFWBMVF$
A06: OPUVTFE
A07: ame signal value (8-100%).
N.B.: lines A08 and A09 are not used.
r
This function is active for 3 minutes. To interrupt the “INFO” function, press .
19.3 FAULTS DISPLAY
For more detailed technical information, please consult the “SERVICE INSTRUCTIONS”.
19.4 ADDITIONAL INFORMATION