6.7 Setup procedure
When the thermostat is connected to the electrical power, the display
shows the welcome screen within one minute. The thermostat guides you
through the setup procedure.
1. Select the country.
2. Select the language.
3. Select the time zone.
4. Enable daylight saving.
5. Accept the Terms and Conditions.
Important
If you decline the legal Terms and Conditions you proceed to the
date and time setting and finish the setup procedure. At a later
time you can still accept the Terms and Conditions and set up
your wi-fi connection and app connection.
6. Read the Privacy Policy.
7. Establish a wi-fi connection.
8. Download the app.
9. Connect your mobile device and/or home automation application with
the thermostat.
For more information, see
How to use the uSense, page 7
Setting the date and time, page 22
Setting country and language, page 22
uSense connections, page 26
Terms and conditions, page 43
6.8
Software update
Software updates are available for your thermostat. To update the
software the thermostat must be connected to:
Wi-fi
The internet
The server
When all the connections are made the thermostat will automatically
update the software.
Important
The first software update will be available within one day.
It’s also possible to manually check the status of the software.
See
Check for software update, page 29
Each time the software has been successfully updated:
The thermostat will restart.
A message will appear on the home screen.
6 Installation
40 7718216 - v.02 - 26042019
To Next Page
Loading...
