– 18 –
Inspect Air Louvers
1. Check air louvers (shutters) (Fig. 9) inside
oven and tighten any loose screws.
2. Check oven interior, tighten or replace
loose or missing panel screws. Also check
floor anchors.
Fig. 9
Inspect Cavity Vent
1. Check vent for proper operation.
A. Push vent button (Fig. 10) on control panel to open vent and then push again to close vent.
B. Visually check that vent opens (Figs. 11 and 12) and closes when button is pressed.
Fig. 10
Fig. 11
Fig. 12
Visually Inspect Electrical Connections
1. Inspect all wiring connections for discoloration. If discoloration visible, contact an authorized
service agency.
To Next Page
Loading...
