baxter PW3S User Manual

– 15 –
Denitions and Default Values for Retarder Proofer
/* P0 Software Version Number
/* P1 Fahrenheit or Celsius
/* P2 Temp O󰀨set for Calib. Min. 0 Max. 30, 15 is zero o󰀨set
/* P3 Hum O󰀨set for Calib. Min. 0 Max. 30, 15 is zero o󰀨set
/* P4 Minimum Temp for Proof 65°F
/* P5 Maximum Temp for Proof 115°F
/* P6 Minimum Humid for Proof 25%
/* P7 Maximum Humid for Proof 95%
/* P8 Dummy (undened)
/* P9 Preheat without humidity Preset T=105°F, Time out after 15 min. If Timer Start/Stop button is not pressed
after 30 sec, the unit will go to Proof operation.
/* P10 Minimum Temp for Retard 34°F
/* P11 Maximum Temp for Retard 50°F
/* P12 Rest Time Min. 5 min. Max. 480 min.
/* P13 Recovery Time Min. 30 min. Max. 480 min.
/* P14 1=AM/PM, 0 = Military Time
/* P15 1= 7Day, 0= Single Day
/* P16 Defrost Every xx (hours) Max. 10 hrs.
/* P17 Defrost FOR xx (minutes) Max. 60 min.
NOTE: P0 thru P9 are for Proofer and Retarder Proofer. P10 thru P17 are for Retarder Proofer only.
Default Parameter Values
0001 /* P0 Software Version Number
F /* P1 F=Fahrenheit, C=Celsius
15 /* P2 Temp O󰀨set for Calib.
15 /* P3 Hum O󰀨set for Calib.
65 /* P4 Minimum Temp for Proof
115 /* P5 Maximum Temp for Proof
25 /* P6 Minimum Humid for Proof
95 /* P7 Maximum Humid for Proof
/* P8 Not used
1 /* P9 Preheat 1= disabled, 0=enable
34 /* P10 Minimum Temp for Retard
50 /* P11 Maximum Temp for Retard
30 /* P12 Time for Rest Time
60 /* P13 Time for Recovery
1 /* P14 1=AM/PM, 0 = Military
0 /* P15 1= 7Day, 0= Single Day
6 /* P16 Defrost every x hours
10 /* P17 Defrost time x minutes

baxter PW3S Specifications

General

Brand	baxter
Model	PW3S
Category	Measuring Instruments
Language	English